SPEED LIGHT
Sports Timing System
15
i.
You can also study earlier splits and laps by scrolling up and down with the
[
∧
] or [
∨
] Buttons.
Keep in mind that the timing module will default to the
latest split/lap time when another gate is activated.
j.
When the preselected number of splits have been reached the timing module
will display “FINISHED”.
k.
You can now examine splits and laps at your leisure by using the arrow
buttons.
l.
Pressing [Reset] will reset the timing module ready for another event using
the same number of splits as previously set up. (ie go to point
g.
)
m.
Press [Reset] again to exit to main menu.
n.
Pressing the [OFF] button will turn the timing module off when in the main
menu.
3.10 8 Lane Mode
a.
Before turning the power on,
connect a cable between each Light
Gate and corresponding lane number on the 8 lane interface. Connect the
interface to the timing module via the ‘Multi Function Port’. The connection to
the Multi Function Port must be made before power up to as it is at this point
that the auto detect feature scans peripherals to determine what type of mode is
required.
b.
Press [ON] until screen message appears. Wait for next prompt
(approx. 2 seconds)
