Swecoin TTP 5000, Руководство по обслуживанию

Страница: 7 / 60

Edition B, May 97 TTP 5000 Series Kiosk Printer Sub-system — Service Manual 5
TTP 5250
Control board SWC 728-003
Power requirement +24V
Power connector 6-pole (+5V supply pins disabled)
Firmware storage Flash PROM
RAM size 256 Kbyte
Parameter setting New or modified parameters can be set through
software commands. Complete set of parameters can
be downloaded on-line.
Data comm. interface(s) Serial RS 232 and parallel Centronics-type
Data comm. connectors Ribbon cable-type connectors. Standard DIN and
Amphenol connectors available through the use of
adapter cables.
Backward compatibility Fully backward compatible if the applicable firmware
is downloaded.
The use of flash PROM instead of EPROM permits downloading of firmware, default
parameters, up to 8 character font sets, and logotypes.
The 256 Kbyte RAM size, used as a page buffer, allows full landscape printing.
A unique, Swecoin patented, feature of the TTP 5000 Series printers is that they can
retain the document inside until both the printing and the cut-off operations are
completed.
A number of sensors monitor the printer operation.
Refer to the applicable Technical Specification and Installation Manual for further
information on technical data, printer functions, etc.