Swecoin TTP 5000, Руководство по обслуживанию

Страница: 5 / 60

Edition B, May 97 TTP 5000 Series Kiosk Printer Sub-system — Service Manual 3
1 INTRODUCTION
1.1 About this manual
This manual describes the Swecoin TTP 5000 Series kiosk printers, their function,
maintenance instructions, spare parts, etc.
1.2 Updating
This manual will be updated from time to time as printer functions and features are
added or amended. No automatic distribution of new editions is, however, planned.
Updated manuals can be ordered by e-mail, fax or phone.
You are also welcome to visit our home page (http://www.swecoin.se) where technical
bulletins, manuals etc. will be available.
If you require functions not found in the manual edition at your disposal, please consult
one of our offices for information.
1.3 Safety precautions
Handling the printer in a safe way requires that you keep your fingers away from the
cutting mechanism when the power is switched ON.
1.4 The TTP 5000 products
The printers are divided into models such as TTP 5000, TTP 5100, TTP 5200,
TTP 5250, etc.
Each model is further divided into types representing the paper widths 60, 80, and
112 mm. Each type can also be divided into versions depending on installed options.
The main differences between the printer models is the type of built-in control board. The
following list describes the main features of the control boards used so far:
NOTE! — Regarding the TTP 5000 model, this manual only covers printer versions
equipped with control board SWC 492-000.