Swecoin TTP 5000, Руководство по обслуживанию

Страница: 24 / 60

TTP 5000 Series Kiosk Printer Sub-system — Service Manual Edition B, May 97 22
REPLACEMENT
1. Push the cutting knife of the cutter module down to its bottom position.
2. Install the presenter module in the reverse order. See page 34 (TTP 5100) or page 44
(TTP 5000) for correct connector positions.
3. Check that there is a 0.2 mm distance at any point between the rear edge of the
presenter module and the cutting knife. If necessary, adjust by loosening the fixing
screws of the print and cutter module assembly. A too big distance might cause the
paper running down between the cutter and presenter modules.