background image

Memory Camera Series

With motion detection capturing

English

If this device does not work when you first
plug it in, do not take it back to the store.

Contact the Swann Helpdesk using our fast e-mail service

or call us on one of the Toll-Free numbers

shown on the back cover of this booklet.

[email protected]

Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)

Installation Guide

Swann Technical Support

All Countries E-mail: [email protected]

UNITED STATES toll free

877-274-3695

(Sun-Thurs, 2pm-10.30pm PST)

800-627-2799

(Mon-Fri, 9am-1pm PST)

USA Exchange & Repairs

562-777-2551

(Mon-Fri, 9am-5pm PST)

AUSTRALIA toll free

1300 13 8324

(Mon-Fri, 9am-5.30pm Aus EST)

International

+61 3 8412 4610

(Mon-Fri, 9am-5.30pm Aus EST)

See http://www.worldtimeserver.com for information on different time zones

and the time in Melbourne Australia compare to your local time.

Telephone Helpdesk

Swann warrants this product against defects in workmanship and material for a period of one (1) year
from it’s original purchase date. You must present your receipt as proof of date of purchase for warranty
validation. Any unit which proves defective during the stated period will be repaired without charge for
parts or labour or replaced at the sole discretion of Swann. The repair or replacement will be warranted
for either ninety days or the remainder of the original one year warranty period, whichever is longer.
The end user is responsible for all freight charges incurred to send the

to Swann’s repair centres.

shipping from and to any country other

than the country of origin. The warranty does not cover any incidental, accidental or consequential
damages arising from the use of or the inability to use this

. Any costs associated with the fitting or

removal of this product by a tradesman or other person or any other costs associated with its use are the
responsibility of the end user. This warranty applies to the original purchaser of the

only and is

not transferrable to any third party.

Unauthorised end user or third party modifications to any component or evidence of misuse or abuse of
the device will render all warranties void.

product

The end user is responsible for all shipping costs incurred when

product

product

Help Desk / Support Details

Warranty Information

www.swannsecurity.com

8

Содержание Memory Camera Series









Отзывы: