7
Registering an Account
There are several ways to register an account:
•
Using the SwannEye HD PC application - see page 17
•
Using the SwannEye HD Mac application - see page 13
•
From the SwannEye HD mobile app - see page 9
•
Directly on the SwannEye HD website - see page 14
We suggest using whatever method you want to use to control the camera to register
the camera. If you want to register an account and then decide which control method to
use, then you can use the SwannEye HD website.
You don’t need to have
setup your camera to
register an account.
All you need is the
information on the sticker
on the back of the unit,
which will look something
like this:
Reminder:
The camera’s default username is
admin
and the default password is
123456
The information you’ll need to know:
Device No.:
The
Device No.
or
Serial No
(sometimes called
E-ID
(
E
lectronic
-ID)
or
the
Serial Number
) from the sticker on the bottom of your camera. You’ll only need
to add one camera to register an account, but you can add more later. The E-ID code
is the shorter of the two codes, and consists of nine (9) characters starting with the
letters
SW
.
Verification No.:
The security code (sometimes called a
Verification Code
or just
VCode
) is the longer of the two codes printed on the sticker on the back of the
camera. It is sixteen (16) characters long.
Username:
Choose a username for yourself. You can choose any name you like up to
eleven (11) characters long.
Your username is case sensitive.
(Confirm) Password:
Enter a password of your choice, and confirm in the field below.
As with all passwords, choose something that you’ll remember, but would be hard or
impossible to guess.
The password is case sensitive.
E-mail Address:
Your email address. It’s important to ensure you’ve entered it
correctly - if something goes wrong with your account or (heaven forbid) you forget
your password, this is how we’ll get in contact with you.
