6
SwannEye Plus Live View Interface
When you launch SwannEye Plus software, you will see the following screen:
The SwannEye Plus Live View interface allows you to monitor camera feeds from up to
sixteen (16) cameras at once (assuming sufficient bandwidth). From here, you are also
able to record videos, take snapshots, configure Wi-Fi settings, engage in 2-way audio
conversation remotely and do much more.
Many of the functions and buttons in the Live View interface are self-explanatory. In fact,
pointing the mouse cursor at a button will reveal a tool-tip telling you what the button does.
Adding to the Camera List
The camera contains a
U
nique
ID
entifier code that’s embedded on a QR sticker
(it’s a
sticker with lots of little black squares that form a larger black and white square). The
UID
helps you to connect your PC or SmartPhone to the camera in just a few simple steps using
Swann’s Peer-to-Peer (P2P) network technology. P2P cuts out all of the messy networking
stuff that you used to have to do to get connected!
Before you perform the following steps, look for the QR sticker on the bottom side of the
camera and write down the UID code:
1
Click the
button. This displays the
Add Device Information
window.
2
Click
Search
. Your computer will scan for connected cameras and display them as a list.
3
Double-click the
UID
code that matches your camera. This populates the
UID
box at the
bottom of the window automatically.
At this point, you may want to write down your camera’s IP address as this will be helpful
when you want to access the camera using a web browser. See
“Accessing the Camera
through a Browser” on page 14
for more details.
Camera List
Play/
Stop All
Cameras
Connection
status
Camera
Operation
Screen Modes
Configure cameras
Set recording
folder and
view images &
video clips
