3
Introduction
Layout of the Camera
1
Infrared LEDs:
Illuminates targeted
areas when in near-total darkness.
2
Illumination Sensor:
Detects the amount
of incoming light and turns on the IR
LEDs for night vision when necessary.
3
Microphone:
Allows the camera to hear
nearby sounds and stream them with
video.
4
Power LED:
Solid red indicates camera
is powered.
5
Network LED:
Blinks when there is
communication between the camera
and network.
6
DC In Power:
To connect power adapter.
7
Antenna Connector:
To attach Wi-Fi
antenna.
8
Reset Button:
Press and hold for a few
seconds to reset all camera settings
back to the factory defaults.
9
Network (LAN) Port:
To connect
Ethernet cable to a router for wired
connections.
10
Audio In:
To connect an external
microphone.
11
Audio Out:
To use the intercom function,
connect speakers to the audio output.
Using SwannEye Plus, you can talk to
your mobile device and your voice will be
heard on the speakers connected to the
camera.
12
Alarm I/O Block:
For connecting
external alarms and sensors.
Congratulations on your purchase of this Swann Pan & Tilt
IP Camera! This camera is versatile, easy to set up and
packs some nifty features like built-in microphone for 2-way
conversations and infrared night vision. Best of all, it can
be totally wireless - if there’s a Wi-Fi network your camera
can connect to the Internet through, then just connect the
camera to power and you’re good to go.
1
2
3
4 5
6
7
11 12
10
9
8
