34
3. WIFI Mode Log-in, Mixer Setting
Suitable for all fixed places covered with WIFI, remote distance depends on the power of your
wireless router.
3.1 Click tab shown above, select the correct WIFI you need in the list.
3.2 Click
then type in your password for the wireless router.
AP Mode Log-in, Mixer Setting
For places not covered with WIFI, you can log in by AP mode.
4.1 Click tag shown above, SSID will show you the default AP name of mixer.
4.2 You can change the name of SSID and decide if password is needed when log-in, then click
“S
ave
”
.
7
”
high definition touch screen
Main output, 16-band level meter
USB 2.0 interface
Three page turn buttons - INPUT1-8, INPUT9-12 ST-USB and BUS1-8
SEND - fader send mode button, when system rests on IN1 or IN2 and one certain channel is
selected by pressing SEL, Press SENDS, physical fader can adjust the bus send level of this
channel (Bus1-Bus8, LR),
After enter SENDS, MUTE button can open the Bus Send function, SOLO can fast set zero for
Send channel
POWER button: long press 3 sec to power on/off; short press 1 sec to Lock when all physical
buttons are invalid and the screen blacks out; short press again to exit Lock
Button features SELECT, SOLO, MUTE/ON, 8-band level meter and CH control
Button features SELECT, SOLO, MUTE/ON and main output CH control
Parametric button
Five buttons from left to right: SETUP, BLACK, COPY, PASTE, PLAY
Headphone volume
Headphone jack
DB20P front panel
5
M
M
M
M
M
M
M
M
M
8
9
10
11
Press SETUP to enter system page
Press BLACK to exit
Press COPY/PASTE to copy/paste the parametric setting of channel
