parameter adjustment
Fig . Mixer rear panel
4
35
five buttons SETUP BIACK PLAY/PAUSE, COPY, PASTE.
SETUP is enter the system page.
BIACK is to exit the system.
COPY and PASTE is to copy and paste the channel parameter setting.
PLAY/PAUSE play/pause the audio source in USB.
flip page: INPUT1-8 INPUT9-12 ST-USB and BUS1-8
SEND is the fader send mode button. When the system in In1 or In2 page press SEL to select one channel,
Press SENDS. You can use physical fader to control the BUS send level (Bus 1~Bus 8 LR). After entering
SENDS MUTE switch is the switch to turn on/off Send BUS function. SOLO is to send quickly set 0 function.
The channel strip with SELECT, SOLO, MUTE/ON and motorized fader
8 channel XLR mic in connector
4 channel Combo in connector
2 Jack stereo in
7 inch touch screen
SELECT button, SOLO button, MUTE/ON button, 8 band level meter and 100mm motorized faders
Channel labels
12V power socket
Stereo monitor output connector
8CH bal output connector
IPAD Part
5.1. Use the IPAD from Apple Inc, search
“
soundking
”
or
“D
M20
”
in App Store, as shown below, install the
APP accordingly.
5.2. Click
“
Settings
”
-
“W
LAN
”
in IPAD, select the same WIFI or the AP, as shown below.
