Swagelok TF72, Руководство пользователя, Страница: 12 / 20

12 Tube Facing Tool User’s Manual
Unpacking the Tube Facing Tool
Shipping Case Contents
■
1 Tube facing tool
■
1 Bench mount bracket
■
1 Tool holder with 1 cutting insert
■
1 Tool set (4 mm T-handle hex key, 3 mm hex key, T15 Torx
driver)
■
1 User manual
Report any missing or damaged parts to your authorized
Swagelok representative immediately.
Installation of the Cutting Insert and the
Tool Holder

CAUTION
Do not touch the sharp cutting edges while mounting
the multifunctional tool Wear protective gloves
Cutting Insert
Attach the cutting insert to the tool holder with the curved side
of the insert away from the tool holder. Use the included T15
Torx driver to tighten the screw.
Tool Holder

CAUTION
Allow the tool to run until it stops rotating and
unplug the tool before changing tooling, performing
maintenance, or transporting the tool
1. Install the tool holder into the guiding groove of the tube
facing tool housing.
2. Press the tool holder against the housing and tighten the set
screw using the 4 mm T-handle hex key.
Note: The tool holder must be flush with the housing.
The tool mounting plate offers different tool holder mounting
options, according to the size of the tube.
Fig 6 Installing the Cutting Insert
Fig 7 Installing the Tool Holder
Fig 8 Tool Mounting Plate
4 in.
(101 mm)
2 in.
(50.8 mm)
1 in.
(25.4 mm)
3 in.
(76.2 mm)