Svero Lifting AB | Momarken 19, 556 50 Jönköping, Sweden
T:
+46 (0) 36 31 65 70
12
Daily checks
After every working day on which the Smart Hoist has been used, the following should be
checked:
•
Is the Smart Hoist deformed or otherwise damaged, visible or not? Are any parts
missing?
•
Are the hooks intact or have any hook openings opened up? Are the hook latches
undamaged and functional?
•
The load chain must be undamaged, i.e. no signs of wear and no deformed or
otherwise damaged links.
•
The load chain must not be kinked or twisted.
•
The hand chain must also be in good condition.
•
The brake function must be intact.
In the event of faults or failures, the hoist must be repaired and carefully checked by a
specialist before reuse.
Inspection and maintenance
Should always be performed by authorized personnel or Svero.
Periodic checks
Periodic checks are normally carried out yearly to detect and remedy any faults. If
required (e.g. high frequency of use), more frequent checks may be carried out. See
“Checklist for periodic checks”
on page 16. Measure hooks and load chain to detect any
changes in shape.
Checks of load-hook (see Fig. 4 and Table 3)
Opening dimension A on the hooks is important. A hook with an opening larger than the
maximum dimension (A max) has been exposed to overloading or overheating. It
therefore does not have the necessary load capacity. The hooks may also have been
exposed to long-term wear (dimension B).
