Svero Lifting AB | Momarken 19, 556 50 Jönköping, Sweden
T:
+46 (0) 36 31 65 70
10
Pic. 13 Stop screw in correct position
8.
Finally, check that the Smart Hoist rolls easily and freely on the beam.
Now the Smart Hoist is ready for use.
Safety instructions
•
Check the function of the Smart Hoist before use. See Daily checks pages 12, 16.
•
Check that the beam
o
has sufficient carrying capacity
o
is securely anchored
o
has end stops
o
doesn’t have more than a 0,3 %
slope
o
the beam flange, on which the wheels rolls, is clean and free from obstacles
•
Do not load more than the Working Load Limit (WLL).
•
Make sure nobody is under a hanging load!
•
The position of the load must not deviate more than 5 degrees from a vertical line
from the Suspension point of the Smart Hoist to the floor.
•
Handle the Smart Hoist carefully. Do not push the Smart Hoist at high speed along
the beam.
•
The Smart Hoist must not be used for lifting or transporting people.
•
Do not leave a suspended load unattended.
•
Do not use the chain hoist for welding work where it is exposed to welding spatter
or current.
•
Only hand power from a single person is permitted on the hand chain. If the chain
feels too heavy, use a hoist with higher capacity or reduce the load.
