SV 258 PRO User Manual
32
5.1.1
STATUS view
In the STATUS view you can check the station status and configure status alarms.
•
To update instrument’s status, click the
UPDATE STATUS
button.
•
To configure status alarms Conditions and related Actions for the measurement points, click the
STATIONS ALARMS
button.
Click
+ADD ALARM
in the pop-up box and a new
Alarm(1)
with CONDITIONS, ACTIONS and
MEASUREMENT POINTS areas will appear. Alarms are based on Conditions and relate to Actions, that
are default e-mails to the specified recipients, and refer to Measurement points. To configure Alarm:
1. click the
Status
button and in the EDIT CONDITIONS pop-up box:
a. select
Status source
:
Mains
,
External voltage
,
Battery charge
,
Storage memory
,
System check
etc.,
b. click the
Trigger value
selector and choose the required value of the selected
Status source
.
The SvanNET alarms have next meanings:
•
Mains
o
Trigger Value: Off
– alarm is generated when the system detects loss of power supply
o
Trigger Value: On
– alarm is generated when the system detects appearance of power
supply
•
External voltage
o
Trigger Value: xx.xx V
– alarm is generated when the system detects an external power
drop below the selected value. In this case, external power means power supply and all
various battery packs
•
Battery charge
o
Trigger Value: xx % - alarm is generated when the system detects a decrease in the
percentage of battery charge below the selected threshold.
