SV 258 PRO User Manual
24
2. Connect the SC 278 cable to the SV 84 accelerometer.
3. Install the accelerometer on the mounting adapter and
screw it with the Allen key (key is included in the
accessories set).
4. Remove the protection cap from the input socket
(
INPUT 1-3
) on the case by turning it counter-clockwise
and fix it on the special holder.
5. To connect the cable, start by lining up the key on the
plug and the socket, then lock the connector by turning
the ring clockwise (only the ring close to the socket will
rotate).
To disconnect cables, push the connector towards the
station and turn it counter-clockwise. New connectors
require more force so using a closed hand is more
effective than using just fingers.
6. If you wish to power the station, connect the power
supply cable to the
DC SUPPLY
socket in the same
way.
7. To use Alarm lamp, connect the SP 272 connector to the
EXTERNAL INTERFACE
socket on the SV 258 PRO
case.
