SV 104A USER'S MANUAL_______________________________________________________
60
6.5.5
Display VIEW configuration tab
As mentioned in chapter 3.9 there are quite a few VIEW modes accessible on the display, when
the dosimeter is performing a measurement run.
•
In the
left panel
named
“Modes views”
you can select which VIEW mode will be present when
you press the
<ENTER>
key on the dosimeter keypad
Note: If you do not want to use all three ACOUSTIC PROFILES it would be convenient
for you to enable only one acoustic PROFILE to be displayed
– just select the required one.
Note:
The “ONE-RESULT” (chapter 3.9.2) is the only VIEW mode that is always
present, and cannot be disabled.
•
In the
right panel
named
“Display Results”
, you will find a list of over a dozen
measurement parameters, that can be configured to be presented on the
SV 104A
display,
when you press
<SCROLL>
key. See Appendix D to review acronyms for each parameter.
Figure
6-11
Display VIEW configuration tab
Up to three
profiles can be
switched on
Screen saving
mode can be
activated
