SV 104A USER'S MANUAL_______________________________________________________
50
6
SUPERVISOR BASIC OPERATIONS
This chapter explains data storage, the configuration setup of the dosimeter, and how to customize
the parameters via the
Supervisor
software.
With use of micro USB cable, software, and
SV 104A
, it is easy to:
1. set up required configuration parameters and upload these, so called
SETUPS,
straight
to the
SV 104A
instrument
2. retrieve time history data to view and analyse your noise recorded charts, graphs, with extended
reporting functionality
6.1
Installing and connecting to PC
Insert the
Supervisor
software CD/DVD into your PC and run the installation program.
After installation, you are ready to connect the
SV 104A
dosimeter.
3. Plug the USB cable into the computer
4. Plug the opposite end of the cable (micro USB) into the dosimeter itself
5. The
SV 104A
is powered and charged directly through the computer; thus, you do not need
separate charger. The dosimeter screen will be switched on automatically with current charging
information only
6. Turn on the dosimeter (see chapter 4.3) - long press of the
<ENTER>
key
7. Windows will install drivers for Svantek instruments if not previously installed
8. Once switched on, run the
Supervisor
software.
Figure 6-1
Supervisor splash screen
Note: Supervisor software enables communication with multiple dosimeters. Therefore, with
the use of a USB hub such as the SA 156 it is pretty straightforward to connect all of them at the same time.
Just make sure your computer system has enough power capability (see chapter 4.1 for details).
