Suzuki LT-A400, Руководство по обслуживанию

Страница: 460 / 502

6B-9 Steering / Handlebar:
• Tighten the steering shaft lower nut to the specified
torque.
Tightening torque
Steering shaft lower nut (b): 49 N·m (4.9 kgf-m,
35.5 lb-ft)
• Install a new cotter pin.
CAUTION
!
Replace the cotter pin with a new one.
Tie-rod
• Temporarily install the lock-nut (1), (2) and tie-rod end
(3) to the tie-rod (4).
NOTE
The lock-nut (1) have left-hand threads.
• When installing the tie-rods, make sure the short side
“a” of tie-rod come outside.
• Tighten the tie-rod end nuts to the specified torque.
Tightening torque
Tie-rod end nut (a): 29 N·m (2.9 kgf-m, 21.0 lb-ft)
• Install the new cotter pins.
CAUTION
!
Replace the cotter pins with new ones.
• Push the tie-rod to tie-rod lock-nut tightening direction.
• Tighten the lock-nuts to the specification.
CAUTION
!
When tightening the lock-nuts, hold the tie-
rod end with a open end wrench.
NOTE
The lock-nuts (1) have left-hand threads.
Tightening torque
Tie-rod lock-nut (b): 29 N·m (2.9 kgf-m, 21.0 lb-ft)
(b)
I827H1620036-01
3
3
3
2
1
3
4
4
2
1
I827H1620038-01
“ a ” “ a ”
I827H1620039-01
(a)
I827H1620037-02
(a)
(a)
I827H1620040-02
(b)
1
(b)
(b)
I827H1620041-02