Suzuki GSX1200 1999, Руководство по обслуживанию

Страница: 225 / 274

ELECTRICAL SYSTEM 6-31
• Remove the seat. (
%
5-2)
• Remove the fuel tank. (
%
4-3)
• Disconnect the signal generator coupler and connect the multi
circuit tester with the peak volt adaptor.
Blue (
+
Probe) – Yellow (
_
Probe)
• Measure the signal generator peak voltage in the same man-
ner as on the ignitor coupler.
) )
) )
)
Tester knob indication: Voltage (
* *
* *
*
)
$ $ $ $ $
Signal generator peak voltage:
More than 1.0 V (Blue – Yellow)
If the peak voltage on the signal generator lead wire couplers is
OK but on the ignitor coupler is out of specification, the wire har-
ness must be replaced. If both peak voltages are out of specifica-
tion, the signal generator must be replaced and re-checked.
SIGNAL GENERATOR
• Remove the seat and fuel tank and disconnect the signal gen-
erator coupler.
• Measure the resistance between the lead wires and ground. If
the resistance is not within the specified value, the signal gen-
erator stator must be replaced.
) ) ) ) )
Tester knob indication: Resistance (
Ω Ω
Ω Ω
Ω
)
$ $ $ $ $
Pickup coil resistance: 135 – 200
Ω Ω Ω Ω Ω
(Blue – Yellow)
∞Ω ∞Ω ∞Ω ∞Ω ∞Ω
(Blue – Ground)
NOTE:
%
3-14 for signal generator replacement.
Signal
generator
Signal
generator
coupler
Peak
volt
adaptor
Signal
generator
Signal
generator
coupler
Y
Bl
Ω
Ω