Suzuki GSX1200 1999, Руководство по обслуживанию, Страница: 223 / 274

ELECTRICAL SYSTEM 6-29
Measure ignition coil (for #2 and #3 cylinders) primary peak volt-
age in the same manner of the ignition coil (for #1 and #4 cylin-
ders) measuring procedure.
Ignition coil (For #2 and #3 cylinders):
B/Y terminal – Ground
(
+
Probe) (
_
Probe)
B/Y: Black with Yellow tracer
NOTE:
Do not disconnect the ignition coil primary wire.
) ) ) ) )
Tester knob indication: Voltage (
* * * * *
)
$ $ $ $ $
Ignition coil primary peak voltage: More than 140 V
If the voltages are lower than the standard values, inspect the
ignition coil and the signal generator.
IGNITION COIL RESISTANCE
• Measure the ignition coil resistance in both the primary and
secondary windings. If the windings are in sound condition, their
resistance should be close to the specified values.
) ) ) ) )
Tester knob indication: Resistance (
Ω Ω
Ω Ω
Ω
)
$ $ $ $ $
Ignition coil resistance
Primary: 2 – 4
Ω Ω Ω Ω Ω
(
+
tap –
_
tap)
Secondary: 30 – 40 k
Ω Ω Ω Ω Ω
(Spark plug cap – Spark plug cap)
Ω
k
Ω