Suzuki GSF650, Руководство по обслуживанию

Страница: 118 / 333

3-82 ENGINE
CAM CHAIN TENSIONER ADJUSTER
• After removing the spring holder bolt
1
and spring, unlock the
ratchet mechanism
2
and push the push rod
3
all the way
into the cam chain tensioner adjuster.
NOTE:
Before installing the cam chain tensioner adjuster, turn the
crankshaft clockwise to remove any cam chain slack between
the crankshaft sprocket and exhaust camshaft sprocket.
• Install a new gasket and the cam chain tensioner adjuster
onto the cylinder block as shown.
• Tighten the cam chain tensioner adjuster mounting bolts to
the specified torque.
#
Cam chain tensioner adjuster mounting bolt:
7 N·m (0.7 kgf-m)
• Insert the spring into the cam chain tensioner adjuster and
tighten the spring holder bolt
4
to the specified torque.
#
Spring holder bolt: 35 N·m (3.5 kgf-m)
$
• Recheck the camshaft position (cam timing).
• Install the cam chain guide
5
with the four bolts and tighten
them to the specified torque.
#
Cam chain guide mounting bolt: 10 N·m (1.0 kgf-m)
NOTE:
Be sure to face the arrow mark on the cam chain guide towards
the exhaust side.
CYLINDER HEAD
• Pour about 50 ml of engine oil into each oil pocket in the cylin-
der head.
NOTE:
Turn the crankshaft and check that all the moving parts (e.g.,
cam follower, camshaft) work properly.
After installing the cam chain tensioner adjuster,
check the cam chain slack to make sure that the cam
chain tensioner adjuster is working properly.