Suzuki DF4A страница 44 Скачать руководство пользователя

Страница: 44 / 50

1. Shift the motor into “NEUTRAL”.
2. Remove the propeller from the motor. Refer

to the PROPELLER SELECTION AND
INSTALLATION section.

3. Install the motor on a large container such

as an empty 200 liter drum.

4. Fill the container with clean, fresh water as

illustrated.

5. Start the motor and let it idle for about five

minutes. This will clean the salt water out of
the cooling system.

6. Shut off the motor. Remove the motor from

the container and maintain motor in a verti-
cal position until the engine has drained
completely. Reinstall the propeller as out-
lined in the PROPELLER SELECTION AND
INSTALLATION section.

7. Clean the motor surface and apply a coat of

automotive wax on the external finish of the
motor.

ENGINE NOT RUNNING
– Vertical position –

To flush the water passages, you must obtain
an optional flushing attachment from your
authorized Suzuki Marine Dealer.

1. Remove the flush plug and install the flush-

ing attachment

2. Connect a garden hose to the flushing

attachment.

3. Turn on the water to obtain a good water

flow. Flush the engine for about five minutes.

4. Turn off the water.
5. Remove the hose and flushing attachment

then reinstall the plug into the flushing port.

6. Leave the motor in a vertical position until

the engine is drained completely.

ENGINE NOT RUNNING
– Full tilt up position –

1. Raise the engine to the full tilt up position.
2. Follow the “ENGINE NOT RUNNING – Verti-

cal position” instructions.
DO NOT RUN ENGINE IN THE FULL TILT
UP POSITION.

3. Lower the motor to a vertical position until

the engine is drained completely.

https://www.boat-manuals.com/

Содержание DF4A



















































Результаты поиска

Содержание DF4A

Отзывы:

Похожие инструкции для DF4A

Бренды по названию

Популярные бренды

Suzuki DF4A, Руководство пользователя

Результаты поиска

Содержание DF4A

Отзывы:

Похожие инструкции для DF4A

Бренды по названию

Популярные бренды