manualshive.com logo in svg

Suzuki DF4A, Руководство пользователя

Поделиться
Скачать
Suzuki DF4A Скачать руководство пользователя страница 15

15

IDLE SPEED ADJUSTMENT

The idle speed of your outboard motor has
been factory-adjusted to provide a smooth, sta-
ble idle.
If it is necessary to adjust the idle speed, use
the following procedure.

1. Warm up the engine for about 5 minutes.
2. Make sure that the motor is in “NEUTRAL”

and the throttle control grip is fully closed.

3. Turn the idle adjustment screw 

A

 clockwise

to increase idle speed or counterclockwise
to decrease idle speed.

NOTE:
If idle speed cannot be set within the specified
range, contact your authorized Suzuki Marine
Dealer.

Idle speed
(in Neutral)

DF4A

1250 – 1350
r/min. (min

–1

)

DF5A

DF6A

OVER-REVOLUTION 
LIMITING SYSTEM

This motor is equipped with a revolution limiting
system which activates when engine speed
exceeds 6000 r/min.

Over-revolution can result from cavitation when
turning hard, a propeller with a slipping bush or
worn-down blades, or a trim setting that is too
high.

If the over-revolution limiting system activates,
the motor will exhibit a rough running condition
and you must immediately reduce engine
speed to within the recommended operating
range.

If the system activates frequently, consult your
authorized Suzuki Marine Dealer.

NOTICE

If the Over-Revolution Limiting System acti-
vates at recommended maximum throttle and
you are sure that the propeller pitch is suffi-
cient and there are no factors like “over-trim-
ming” or “ventilation”, there may be a
problem with the Over-Revolution Limiting
System.

Consult your authorized Suzuki marine dealer
if the Over-Revolution Limiting System acti-
vates for no apparent reason.

https://www.boat-manuals.com/

Содержание DF4A



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды