manualshive.com logo in svg

Suzuki DF4A, Руководство пользователя

Поделиться
Скачать
Suzuki DF4A Скачать руководство пользователя страница 19

19

INSPECTION BEFORE 
BOATING

It is important to make sure that your boat and
motor are in good condition and that you are
properly prepared for an emergency.
Always perform the following checks before you
begin boating:

• Make sure that you have enough fuel for

the intended run.

Fuel capacity: 1.0 L (0.26/0.22 US/Imp. gal.)

 WARNING

Failure to inspect your boat and motor before
beginning a trip can be hazardous.

Before boating, always perform the inspec-
tions described in this section.

 WARNING

If you overfill the built-in fuel tank, fuel may
overflow.

Do not fill the tank above the upper limit 

A

.

Fuel tank

Fuel tank filter

: Mesh part on the bottom of filter

• Check the level of engine oil in the sump.

To check the engine oil level:

NOTE:
To avoid an incorrect assessment of engine oil
level, check the level only when the engine has
cooled.

1. Place the motor in a vertical position and

remove the motor cover 

1

 by unlocking the

lever 

2

 and 

3

.

2. Remove the oil filler cap (dipstick) 

4

 and

wipe oil off with a clean cloth.

3. To check the oil level, touch the filler cap

threads onto the filler cap edge as shown.
Do not screw the filler cap.

NOTICE

Running the engine with an insufficient
amount of oil can cause serious engine dam-
age.

Always check the oil level before each trip and
add oil if necessary.

Upper
limit

Lower
limit

https://www.boat-manuals.com/

Содержание DF4A



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды