OPERATING INSTRUCTIONS ALARM BASE
Page 3
3.0 OPERATING INSTRUCTIONS
1. Remote Locking / Arming Alarm
Press the black button on the transmitter
and the following will happen:
•
Vehicles fitted with factory central
door locking. All doors will lock,
including the tailgate.
•
The horn will emit one chirp (if
chirps are selected “ON). The
vehicle’s indicators will flash once
and the dash mounted L.E.D. will
light up.
•
The LED will flash once every two
seconds after five seconds.
•
The engine is immobilised.
Note:
Should the indicators flash and
the horn emit five chirps after Locking,
check that all doors (including tailgate)
are properly closed.
2. Remote Unlocking / Disarming
Alarm
Press the black button on the transmitter
and the following will happen:
•
Vehicles fitted with factory central
door locking. All doors will unlock,
including the tailgate.
•
The horn will emit three chirps (if
chirps are selected “ON”) and the
vehicles indicators will flash three
times.
•
The dash mounted L.E.D. will turn
“OFF”.
•
The engine is de-immobilised.
Note
: The doors will automatically
relock 35 seconds after the doors were
unlocked if no doors or tailgate were
opened.
3. LED FUNCTIONS
The LED has several functions which
are explained as follows:
•
Engine is immobilised, this is
indicated by two flashes every 2
seconds.
•
Engine is immobilised and the
system was armed with the
transmitter, this is indicated by
one flash every 2 seconds.
•
Alarm triggered reporting, if alarm
programmed ON, this is indicated
by a continuous flash from the
LED after disarming the system
using the transmitter (Refer to
Diagnostic Tables section 4)
•
Low battery in transmitter, this is
indicated by the LED flashing
twenty times when the ignition is
turned ON after disarming.
NOTE:
If this warning is received
regularly the battery in the
transmitter must be replaced as
soon as possible. If the battery is
allowed to run too low, this will
cause the transponder function to
fail, causing the engine to remain
immobilised.
