INTRODUCTION
Page 2
1.0 INTRODUCTION
This owner’s manual will enable you to
fully understand all of your systems
functions and features. You will find that
operating the system is as simple as
pressing a button on your transmitter.
Please Note : This manual provides
instructions for operating the remote
central locking, alarm and engine
immobilisation. Keyless Entry function is
only available on models fitted with
power door locks as original equipment,
ie: 5 door models only. Immobilisation
detail applies to all models. Alarm
upgrade kits are available at extra cost.
The system is controlled by a
microprocessor, which constantly
monitors the doors, bonnet, tailgate and
ignition.
An audible alarm and visual warning is
given (if programmed ON) when a door
is opened or ignition is turned on, once
the vehicle is locked using the
transmitter.
Should a problem be detected when the
doors are locked using the remote
transmitter (such as a door remaining
open or ajar), the system will inform you
by flashing the indicators five times and
the alarm will inform you via a series of
audible error chirps.
These features are fully described in the
operating instructions : Section 3.0
Alarm Base where the horn will sound
or in the case when an alarm upgrade
is fitted the siren will emit a series of
chirps.
Should you have any questions or are
still unsure of some features, please
see your SUZUKI dealer, who will be
happy to assist.
2.0 CONTENTS
With this car alarm system you will
receive:
Two code hopping two channel
transmitters.
In addition, the following items will be
installed in your vehicle:
Microprocessor control module
Ignition Immobilisation sensor.
Dedicated wiring loom especially
designed for your vehicle.
Dedicated mounting brackets.
Dash mounted LED.
