Suzuki 2009 AN400, Дополнительное руководство по обслуживанию, Страница: 69 / 143

ABS: 4E-27
8) Follow the displayed instructions. 9) Check that both “Current DTC” (4) and “Past DTC”
(5) are deleted (NIL).
10) Close the SDS tool and turn the ignition switch OFF.
11) Disconnect the SDS tool and reinstall the removed
parts.
12) Ride the motorcycle at more than 30 km/h (18.6
mile/h) and quickly apply the brakes to check that
the ABS activates correctly.
SDS Check (AN400A/ZAK9)
B905H14504023
Using SDS, take the sample of data from the new motorcycle and at the time of periodic maintenance at your dealer.
Save the data in the computer or by printing and filing the hard copies. The saved or filed data are useful for
troubleshooting as they can be compared periodically with changes over time or failure conditions of the motorcycle.
For example, when a motorcycle is brought in for service but the troubleshooting is difficult, comparison with the
normal data that have been saved or filed can allow the specific ABS failure to be determined.
1) Remove the upper meter panel. Refer to “Upper Meter Panel Removal and Installation” in Section 9D in related
manual.
2) Set up the SDS tool. (Refer to “SDS operation manual for further details.)
NOTE
• Before taking the sample of data, check and clear the Past DTC. Refer to “DTC (Diagnostic Trouble
Code) Deleting (AN400A/ZAK9)” (Page 4E-25).
• A number of different data under a fixed condition as shown should be saved or filed as sample.
Special tool
: 09904–41010 (SUZUKI Diagnostic system set)
: 99565–01010–020 (CD-ROM Ver.20)
I705H1110006-01
I705H1110009-01
5
4
I718H1450057-01
I905H1450017-03