LAMBDA VF-5 OPERATION MANUAL – REV. 1.04A (20190606)
14
... and then the following menu is displayed.
Setting the Base Wavelengths of each Installed Variable Filter
The following menu is the first one displayed after pressing F1 (BROWSE) on the previous
menu:
Note that if no base wavelength has been assigned to Filter Position 0, the wavelength is
shown as “***”. The same is true for every other filter position (F2 through F9). Press F2
key to navigate to the first filter position on the screen. The 3-digit base wavelength number
next the filter position or the “***” if no base wavelength defined, gets replaced with a
blinking question mark (as shown on the following screen).
The base values (in nanometers) currently supported for the Lambda VF-5 are: 380, 440, 490,
550, 620, 700, 800. If one of these numbers is appropriate to be entered for Filter Position 0,
then enter the three digits on the unit’s keypad. Pressing F2 key again, enters the
wavelength value into the current position (if just previously keyed in), and selects the next
valid filter position for editing. Note that in the VF-5, only five filter positions are available
and positions are all even numbered (0, 2, 4, 6, and 8). None of the odd-numbered filter
positions can be used. If there are more filter positions available than are shown on the
screen, pressing F2 when on the last filter position for the screen will cause the controller to
display the screen with the next set of filter positions, as shown in the following.
Once the desired base wavelengths have been entered for all the valid filter positions, press
the 0 key three times (“000”) the base wavelength browser, whereupon an exit prompt is
displayed as shown in the following:
F1-BROWSE 999-*
F2-ENT 000-EXIT
F0-F***; F1-F***
F2-F***; F3-F***
F0-F ? ; F1-F***
F2-F***; F3-F***
F4-F***; F5-F***
F6-F***; F7-F***
F8-F***; F9-F***
ARE YOU SURE TO
EXIT? 1-YES 0-NO
Содержание Lambda VF-5
