Sutter Lambda VF-5, Руководство по эксплуатации

Страница: 16 / 78

LAMBDA VF-5 OPERATION MANUAL – REV. 1.04A (20190606)
6
Figure 1-3. Electrical connections.
FILTER WHEEL POSITION AND ANGLE CONTROL – A 25 pin, DSUB connector used to
link the Lambda VF-5 controller with the VF-5 filter wheel.
USB PORT – A USB Type B receptacle used to connect the Lambda VF-5 controller as a USB
device to a USB port of a host computer.
SERIAL PORT – A 9 pin, DSUB connector used for establishing a serial interface between
the Lambda VF-5 and a remote device (computer) using the cable provided. This cable should
not be used simultaneously with the parallel port cable.
POWER SWITCH – This turns on the system power.
LINE POWER – This socket is used to connect the power cord to the Lambda VF-5.
FUSE LABEL – Information found here includes the model number of this instrument,
appropriate supply voltage and the type of fuse required for the supply voltage.
FUSE – Fuse compartment containing the supply voltage fuse and an extra fuse. Replace
blown fuses with a fuse of the appropriate value as given on the fuse label (back panel of the
controller) or on the TECHNICAL SPECIFICATIONS page in this manual.
Not used
Not used
Not used
Connects to
VF-5 filter
wheel
USB or serial
for external
control
Power switch,
fuse, & cable
receptacle