Sutter Instrument MP-285, Основные операции

Страница: 33 / 40

MP-285 SYSTEM ROE BASIC OPERATIONS – REV. 4.04 (20210122)
23
7. DIAGONAL OR 4TH AXIS MOVEMENTS
By simultaneous movement of two axes, the MP-285 can produce movement in a synthetic
fourth axis or diagonal. This feature allows for axial micropipette movement along an axis at
an angle with respect to the coordinate system defined by the three axes (x, y, and z) of the
manipulator.
To make diagonal movements while in the movement screen:
1.
Press the remote NORM/DIAG button on the encoder (down and lit = diagonal mode).
2. The movement screen should now indicate that the controller is in diagonal mode as
evidenced by the word “Diagonal” in the lower middle of the screen.
3. Diagonal movement is accomplished by turning the Z-axis knob on the ROE.
The controller is factory programmed to produce fourth axis movement in the X-Z plane at a
45-degree angle. Establishment of fourth axis movement at other angles or in other planes is
covered in detail in the
MP-285 Reference Manual
.