Sutter Instrument Lambda 10-2, Инструкции по эксплуатации

Страница: 12 / 70

LAMBDA 10-2 OPERATION MANUAL – REV. 2.04 (20120224)
4
LB10
LB10 LB10
LB10----NWE
NWE NWE
NWE (without shutter and set up for emission)
LB10 LB10 LB10 LB10----WD WD WD WD (two wheels mounted back to back, without shutter)
LB10 LB10 LB10 LB10----WDS WDS WDS WDS (two wheels mounted back to back, with one shutter and one slide-in filter
holder)
10
10 10
10----position 32mm filter wheels:
position 32mm filter wheels: position 32mm filter wheels:
position 32mm filter wheels:
LB10 LB10 LB10 LB10----W32 W32 W32 W32 (without shutter)
LB10
LB10 LB10
LB10----W32S
W32S W32S
W32S (with shutter)
5 5 5 5----position 50mm filter wheel: position 50mm filter wheel: position 50mm filter wheel: position 50mm filter wheel:
LB10 LB10 LB10 LB10----W50 W50 W50 W50 (without shutter).
NOTE: All shutters mentioned in this manual for use with the Lambda 10 NOTE: All shutters mentioned in this manual for use with the Lambda 10 NOTE: All shutters mentioned in this manual for use with the Lambda 10 NOTE: All shutters mentioned in this manual for use with the Lambda 10----2 are 2 are 2 are 2 are Uniblitz
®
® ®
®3
3 3
3
shutters. shutters. shutters. shutters.
1.2.3 1.2.3 1.2.3 1.2.3 Filters Filters Filters Filters
The Lambda 10-2 filter changer is designed for use with any 1-inch or 25-mm filter with a
thickness that does not exceed the following dimensions:
4.5 mm (0.18 in.) for Slide 4.5 mm (0.18 in.) for Slide 4.5 mm (0.18 in.) for Slide 4.5 mm (0.18 in.) for Slide----in filter holders in filter holders in filter holders in filter holders
5.38 mm (0.21 in.) for Drop 5.38 mm (0.21 in.) for Drop 5.38 mm (0.21 in.) for Drop 5.38 mm (0.21 in.) for Drop----in filter holders in filter holders in filter holders in filter holders
9 mm (0.35 in.) for filter cups 9 mm (0.35 in.) for filter cups 9 mm (0.35 in.) for filter cups 9 mm (0.35 in.) for filter cups
Filter wheels designed for use with 32 mm filters will accept filters with a thickness that
does not exceed the following dimensions:
9 mm (0.35 in.) for filter cups
9 mm (0.35 in.) for filter cups 9 mm (0.35 in.) for filter cups
9 mm (0.35 in.) for filter cups
Instructions for installing filters into the filter wheel can be found in the FILTER WHEEL
chapter of this manual. Filters are not supplied by Sutter Instru
Filters are not supplied by Sutter Instru Filters are not supplied by Sutter Instru
Filters are not supplied by Sutter Instrument. However, filters
ment. However, filters ment. However, filters
ment. However, filters
conforming to the above specifications can be purchased from any filter manufacturer.
conforming to the above specifications can be purchased from any filter manufacturer. conforming to the above specifications can be purchased from any filter manufacturer.
conforming to the above specifications can be purchased from any filter manufacturer.
1.2.4
1.2.4 1.2.4
1.2.4 Slide
Slide Slide
Slide----In and Drop
In and Drop In and Drop
In and Drop----In Filter Holders
In Filter Holders In Filter Holders
In Filter Holders
Many users like to have extra Slide-in or Drop-in filter holders for more convenient
replacement of these “fixed” filters. Only use filter holders made by Sutter Instrument
Only use filter holders made by Sutter Instrument Only use filter holders made by Sutter Instrument Only use filter holders made by Sutter Instrument
Company in the Lambda 10 Company in the Lambda 10 Company in the Lambda 10 Company in the Lambda 10----2 Filter Wheel. 2 Filter Wheel. 2 Filter Wheel. 2 Filter Wheel. Extra filter holders are readily available from
Sutter Instrument Company or their distributors and are listed as “SLIDE-IN” and “DROP-
IN” in the Sutter catalogue. At this point, there are no slide-in filter holders for 32 mm
systems, although a 32-mm Drop-in filter holder is available. In addition, there is a fixed
filter position for a heat-blocking filter in most 32-mm microscope adapters offered by Sutter
Instrument Company. Slide-in and drop-in filter holders are not available for the 50 mm
filter wheels.
1.2.5 1.2.5 1.2.5 1.2.5 Shutters Shutters Shutters Shutters
If you purchase a Lambda 10-2 Filter Wheel system without a shutter and later decide to add
one to the system, the Filter Wheel must be returned to the factory for the upgrade. The
Lambda 10-2 Filter Wheel controller can support a retrofit shutter without modification.
3
Uniblitz® is a registered trademark of Vincent Associates.