11
APPENDIX B:CUSTOM CABLES
Sutron provides two cables for use with the CSA, these are include with the
purchase of the -3 and -4 models. If you wish to make these cables yourself,
below is the information for doing so.
The 6411-1567 is a DB-9 F-F null-modem cable that passes pin 9 through.
This is for use with the Xpert/Xlite COM ports 2 and above, with the jumper
set to p5 volts on pin 9.
Here is the wiring diagram:
DB-9 Pin (Side A)
DB-9 Pin (Side B)
- X
-
3 -
2
2 -
3
7 -
8
8 -
7
5 -
5
1 and 6
-
4
4
-
1 and 6
9 -
9
The 6411-1568 is a DB-9 M-F cable that passes pin 9 from the 8210, over
to pin 1 and pin 9 of the Bluetooth CSA. This "wakes up" the CSA, so that it
knows there is a connection to the serial port and provides power to the CSA.
Without this connection, both the 8210 and the CSA do not think there is a
connection, and will not open their serial ports.
Here is the wiring diagram:
DB-9 Pin
(Male connector Side 8210)
DB-9 Pin
(Female Connector Side CSA)
- X
-
9
-
1 & 9
2
-
2
3
-
3
4
-
4
5
-
5
6
-
6
7
-
7
8 -
8
