National Instruments BNC-2142, Руководство по установке

Страница: 1 / 6

natinst.com
™ and National Instruments ™ are trademarks of National Instruments Corporation. Product and company names mentioned herein
are trademarks or trade names of their respective companies.
322545A-01 © Copyright 1999 National Instruments Corp. All rights reserved. September 1999
INSTALLATION GUIDE
BNC-2142 D
ESKTOP AND
DIN R
AIL
-M
OUNTABLE
BNC A
DAPTER
This installation guide describes how to install and configure your
BNC-2142 accessory.
Introduction
The BNC-2142 is a desktop and DIN rail-mountable BNC adapter you
can connect directly to dynamic signal acquisition (DSA) devices. It
includes six BNC connectors for signal connections, and a 68-pin
I/O connector for connection to the PCI-445x and NI 455x DSA devices.
The BNC-2142 is ideal for simplifying connections between your
measurement apparatus and your DSA device in laboratory, test, and
production environments.
What You Need to Get Started
To set up and use your BNC-2142 accessory, you will need the following:
❑
BNC-2142 BNC Adapter
❑
BNC-2142 Desktop and DIN Rail-Mountable BNC Adapter
Installation Guide
❑
PCI-445x or NI 455x device
❑
SHC68-C68-A1 analog cable
Detailed specifications for the BNC-2142 are in the Specifications section
later in this guide.