3.10
EMPTY BAG OR BIN OF COMPOST
This button stops the cylinder from rotating while the bag/bin is exchanged
preventing spill on the floor beneath the outlet pipe.
Follow the instructions on the screen:
Remove the outlet cover (if appl.)
Remove the bin/bag
Clear the passage inside the outlet pipe if necessary
Put an empty bin/bag in position
Put outlet cover back in position (if appl.)
Make sure that the bag is tight on the outlet or that
the outlet cover is tight on the outlet and bin
When you are ready click on the red ‘X’ to go back to
the start screen
The red exit ‘X’ symbol must be pressed in order to return to the start screen so that
the cylinder can rotate according to settings again.
Note! The program will automatically return to the start screen after 20
minutes of inactivity on any other screen! This mean that after 20 minutes the cylinder
can start it rotation cycle again.
Note! The function of stopping the cylinder from rotating while the bag/bin
is exchanged is in no way connected to the safety system.
LOCKOUT / TAGOUT BEFORE REMOVING BOLTED COVERS.
Press the numeric key pad, enter the
pin code and access ‘basic’ level.
