Susteco Big Hanna T120 Скачать руководство пользователя страница 38

Страница: 38 / 113

3.7.3

MANUAL REGISTRATION OF WEIGHT / VOLUME OF FOOD WASTE AND PELLETS

If registration of weight/volume is activated, the following screen will

appear after pressing the infeed button (see above).

Press the food waste symbol and enter the weight/volume of food
waste that is fed in on the numeric key pad that appears. Confirm with

enter.

Press the pellets symbol and enter the weight/volume of pellets that is fed in on the numeric key pad

that appears. Confirm with enter. Choose action:

Feed in material (infeed cycle start) and rotate the cylinder without registering

weight/volume.

Go back to start screen without registering weight/volume, feed in material or

rotating cylinder.

The registration of weight/volume is chosen in ‘tools’ menu. The registered values are visible when

logging in to settings and the data can be downloaded, see below.

Содержание Big Hanna T120


















































































































Результаты поиска

Содержание Big Hanna T120

Отзывы:

Susteco Big Hanna T120, Руководство по эксплуатации, Страница: 38 / 113

Результаты поиска

Содержание Big Hanna T120

Отзывы: