Service and Maintenance
Adjustment system - Installation Instructions
Page 48
8.2
Instructions for Maintenance
8.2.1
Cleaning
WARNING
Danger of injury by disregarding the
manufacturer’s instructions
The function of the components may be impaired as a result of ignoring the manufacturer’s
cleaning instructions.
Follow all applicable environmental regulations when cleaning.
Remove all cleaning aids after performing cleaning work.
Retract the Height Adjustment System before cleaning.
Remove the load from all lifting elements before maintenance works.
Unplug the motor control from the mains before cleaning.
Stabilize the workplace or the structure on which the Height Adjustment System is secured
before maintenance works.
Allow the components to cool off before cleaning.
Clean the system components with a mild detergent and a damp cloth.
Liquid entry of any kind must be strictly avoided.
Do not use any corrosive detergents or high pressure washing systems to clean the
components of the Height Adjustment System.
Before restarting operation make sure the system is clean and dry.
8.3
Maintenance
The Height Adjustment System should be checked regularly to determine whether there are
conditions that lead to excessive wear or damage to components. Especially the following possible
causes of system failure should be considered.
IMPORTANT
The maintenance instructions given in the following must be understood as
recommendations by the manufacturer. The operator of the Height Adjustment System is
obligated to document maintenance-related observations and to supplement and add
specifications to the maintenance list in these installation instructions on their own. In addition, the
maintenance instructions of the manufacturers of outsourced parts must be observed and
followed!
