Start-up / Operation
Adjustment system - Installation Instructions
Page 41
7.4.1
Function of the Manual Switch
7.4.1.1
Simple Manual Switch UBM-F/2-p
Symbol
Function
Up:
Press the "Up" button until the workplace has reached the
desired height or the maximum height.
Down:
Press the “Down” button until the workplace has reached the
desired height or the minimum height.
+
Reset:
Press both direction keys simultaneously. The workplace
moves gradually to the lower mechanical end stop. The
controller acknowledges this reset drive with a signal tone.
Table 8 Function of the simple manual switch UBM-F/2-p
7.4.1.2
Programmable Manual Switch UBS/6-LCD (Optional)
Symbol
Function
Up:
Press the "Up" button until the workplace has reached the
desired height or the maximum height.
Down:
Press the “Down” button until
the workplace has reached the
desired height or the minimum height.
+
Reset:
Press both direction keys simultaneously. The workplace
moves gradually to the lower mechanical end stop. The
controller acknowledges this reset drive with a signal tone.
Key “M”
Memory button for storing the memory positions. Optionally
you can also change the upper and lower lifting limits via the
setting mode.
Keys "1", "2" and "3"
Up to three memory positions can be stored. To reach the
memory position press and hold the respective key.
Table 9 Function of the programmable manual switch UBS/6-LCD
