Service and Maintenance
Adjustment system - Installation Instructions
Page 47
8
Service and Maintenance
8.1
General
Observe and follow the general accident prevention guidelines.
Carry out prescribed adjustment, maintenance, and upkeep work according to schedule.
Replace defective components as quickly as possible.
Only use tools that are in perfect condition.
Keep suitable containers ready for small parts that may have to be disassembled.
Only use original spare parts approved by the manufacturer.
Tighten screw connections that have been loosened after doing maintenance and service
work.
Reattach disassembled protective devices before the first re-commissioning. Make sure that
the protective equipment is functioning properly.
Perform a functional test (test run) after maintenance or repair work.
Check the proper function of all safety and protective devices.
Remove any used tools, screws, aids or other objects from the operational area of the Height
Adjustment System.
