Safety Notices
Adjustment system - Installation Instructions
Page 14
3.1.1
Operating Company’s Obligations
This partly completed machinery is intended to be incorporated into other machinery, other partly
completed machinery/equipment or to be joined with another framework so as to form a complete
machine as specified under the Machinery Directive. The machine should be put into operation
only after a conformity evaluation procedure in accordance with the Machinery Directive has been
carried out for the complete machine.
3.2
Residual Risk
IMPORTANT
There is a residual risk posed by inadvertent movement of the drives. The
following are determined as potential causes for this:
▪
Damaged cables
▪
External influences (EMC)
▪
Defects in the lifting elements, the controller or on the manual switch
Take the residual risk into consideration with the construction and while preparing the
operating instructions of the final product.
3.3
Safety Equipment
The component is fitted with various safety equipment. This equipment serves to protect persons
working on the component from any danger to life and limb arising from electrical and mechanical
operations and to limit material damage to the component.
3.4
Additional Instructions
In principle, the provisions of the accident prevention regulations of the professional association
also apply to all work on the Height Adjustment System.
In addition, observe and follow the
▪
Applicable and binding accident-prevention regulations
▪
Applicable and binding regulations at the place of use
▪
Recognized technical regulations for safe and professional working methods
▪
Existing environmental protection regulations
▪
Other applicable regulations
