03/01/16
670- 00017B
9
7.0 Installation Instructions
FOLLOW ALL SAFETY INSTRUCTIONS CONTAINED
IN SECTION 3.0 OF THIS MANUAL BEFORE
INSTALLING THIS PRODUCT. FAILURE TO
FOLLOW THE INSTRUCTIONS IN THIS MANUAL
COULD RESULT IN PROPERTY DAMAGE,
PERSONAL INJURY OR DEATH.
7.1 System Component Placement
Movotec
®
Crank Driven “Bolt-On” Lift System components are physically linked
together with hydraulic tubing. Therefore, it is very important to make sure that the
system components are located on the workstation so that each component can be
installed safely without damaging the hydraulic tubing. It is also important to make sure
that the crank has enough clearance to rotate freely beyond the work surface.
7.1.1 Crank Driven Pump Placement - The crank driven pump can be installed
in any orientation, however it is recommended to mount the unit horizontally.
The pump should be installed so that there is enough hydraulic tubing to reach
each lift cylinder and enough clearance for the minimum hydraulic tubing bend
radius of 2 in. (51mm) to be maintained. The crank should be located near the
edge of the work-surface. Suspa
®
Incorporated offers other cranks and crank
hardware options which can be purchased on our website at
https://shop.suspa.com/storefront.aspx
.
7.1.2 Lift Cylinder Placement – The lift cylinders should be located on the
workstation so that the load on the system is balanced. Lift cylinders must also be
oriented vertically and parallel to one another to prevent cylinder binding during
extension and retraction cycles. Suspa
®
Incorporated offers an assortment of
brackets to reduce the number of holes to be drilled for lift cylinder mounting and
to facilitate system installation. These cylinder mounting brackets can be
purchased on our website at
https://shop.suspa.com/storefront.aspx
.
7.1.3 Hydraulic Tubing Placement – Hydraulic tubing must be kept away from
sharp edges and moving parts. Contact with moisture and heat must also be
avoided. Hydraulic tubing should fixed to the workstation or structure using
cable ties and mounting clips. Cable ties and mounting clips can be purchased on
our website at
https://shop.suspa.com/storefront.aspx
.
