Surveon CAM3351R4, Руководство пользователя

Страница: 139 / 174

139
If the status LED shows steady amber for over 1 minute, the camera will
become unresponsive and the upgrade process may have failed. Please
contact with your dealer for technical support.
Resetting to Factory Default Settings
To reset the device to the factory default settings:
1.
Make sure the device is in operation mode.
2.
Using a needle or similar object to press and hold the Reset button
until the camera restarts (about 2 seconds). The status LED will change
to amber during startup.
3.
When the Status Indicator changes to back to Green (which may take
up to 1 minute), the process is complete. The default IP address is
192.168.88.10 if not assigned by a DHCP server.
Note:
Resetting to the factory default settings using the Reset button will
cause all parameters (including the IP address) to be reset. To reset
the unit without changing parameters, disconnect and reconnect the
power connector.
Camera resets can also be performed under System> Reset To Factory
Default.
There are 2 types of reset.

Reset All Configurations to Factory Defaults