EP MODE
Limit the bike's power and maximum speed, suitable for beginners and situations requir-
ing long range
Note: If the temperature of the motor or controller is too high, or the battery power is too
low, the bike will automatically reduce the power to protect the bike.
Function Diagram
07
08
EP
SPORT
Front Number Plate
Horn Button
Speedometer Switch
Milage Display
Brand Logo
Speed Indicator
Connect to charge
the battery
There are side stand
sensors. Normally when
side stand is down, there
will be no power output.
Front Brake Lever
Throttle Control
Rear Brake Lever
Handlebar
USB Port
Battery C apacity Indicator
Key Switch/Steering Lock
Seat
Combination Switch & Speedometer
Check the remaining energy
Turn the key switch
clockwise to turn on the bike
Headlight
Charging port
Battery Compartment
Cap
Frame
Rear Mudguard
Charging port
Rear Wheel
Front Disk
Brake Caliper
Front fork
Controller
Side Stand
Front Fender
Rear Disk Brake
Caliper
Note: For the purpose of maintenance and service, each bike has its unique VIN
number and motor number, please keep these numbers properly. The VIN number is
place on the steering tube andthe motor serial number is engraved on the body of the
motor.
Rear Reflector
Shock Absorber
Battery Compartment Lock
Horn
Lithium-ion Battery Pack
Swingarm
Motor
Skid Plate
Chain Guard
Rear Wheeler
Front Fender
Please identify the parts of the bike according to the labels in the picture and familiarize
yourself with the bike.
SPORT MODE
Full power output, suitable for trail and off-road riding.
Speedometer Switch:
● Momentarily press the switch will display between current speed and total mileage to
current maximum speed and current mileage.
● Long press to clear the maximum speed and mileage.
● Keep pressing the switch and turn on the key switch. After the bike turned ON, still
press the switch for another 4 seconds, and then the speedometer display will switch
from kilometer per hour to miles per hour.
