AC-LC2 Liquid Cooler Dispenser
•
SureShot Technical Assistance Center: 888 777-9990 or +1 902 865 9602
2
Servicing and Warranty
Standard warranty is one year, on-site parts and labour.
Access to USA and Canada-wide Technical Service Network.
The Warranty (see page 11) will be null and void if the dispenser is serviced by unqualified
personnel. Under warranty, service technicians must be approved and dispatched by the SureShot
Technical Assistance Center by calling 888 777-9990 or +1 902 865 9602.
The customer is responsible for all costs not approved by SureShot Solutions.
Inspect for Damage
Note:
Damages incurred during shipment are not the responsibility of SureShot Solutions and are
not covered by Warranty.
If you haven’t already done so,
inspect packaging material for damage. Note any damage in detail.
Unpack the dispenser immediately, following the directions below. Examine the dispenser for
damage. Report any damage to the transportation company and file a claim for damages within 24
hours. Your immediate inspection and reporting protects you against loss.
Notify SureShot Solutions within 24 hours of any damage claims. No returns will be accepted without
prior approval. Obtain an authorized return number by contacting the SureShot Technical Assistance
Center at 888 777-9990 or +1 902 865 9602.
Reshipment
If packaging is not available, it may be purchased from the SureShot Parts Department by calling
888 777-9990 or +1 902 865 9602.
Ensure pieces which may shift in transit are secured using masking tape.
No returns will be accepted without prior approval. Obtain an authorized return number by contacting
the SureShot Technical Assistance Center at 888 777-9990 or +1 902 865 9602.
Unpacking the Dispenser
1.
Position the box with the “This Side Up” arrow pointing upward.
2. Cut the packing straps from the box.
3. Lift the top from the box.
4. Remove the box sleeve by lifting it up and off the dispenser.
5. Lift the dispenser off the bottom of the box and place it on the counter.
Caution:
Always lift the dispenser from the bottom.
6. Remove the plastic protective covering from the stainless steel exterior. Hold the dispenser
firmly at the top and peel in sections from top to bottom.
7. Prior to use, read the Operations Manual and store it for future reference.
Содержание AC-LC2
Страница 1: ...AC LC2 Liquid Cooler Dispenser Operations Manual D 19 211 Rev C ...
Страница 2: ......
Страница 4: ......