Sureshot Dispensing Systems AC2-GP, Руководство по эксплуатации

Страница: 13 / 28

AC2-GP Multi-Sweetener Dispenser
•
SureShot Technical Assistance Center: 1-888-777-9990 or 902-865-9602
9
SET-UP
Power Cord
The dispenser is supplied with a UL-approved, 3-prong detachable AC power cord. There
is no separate on/off switch so once the power cord is connected to the dispenser and
plugged into the outlet the dispenser is ON.
1. Plug the power cord into the receptacle on the back of the dispenser.
2. Plug the other end of the cord into a 3-prong AC electrical wall outlet.
If the dispenser does not operate, see Troubleshooting section on page 18.
Note : older dispensers were supplied with an in-line, external power supply which
attaches to the back of the unit using a screw-type locking connector. This type of power
supply must be kept away from water and may have been supplied with industrial Velcro
for attachment onto the rear of the dispenser.
Language Setting
The dispensing unit has the ability to switch the language displayed in the LCD display
window.
1. To change the language, unplug the dispenser.
2. Plug in the dispenser. This re-boots the software.
3. Watch the LCD display window for the language to be displayed. When the language
is displayed, press and hold the

Program Mode button for 3 seconds until a beep
is heard which confirms that the language has been changed.
4. Look at the LCD display to confirm the correct language is set. There is a 3-second
delay to allow the user to change the language without removing the DC connector.
Note: Language may also be set in Program Mode following instructions on page 16.