SureKap SK6000-BF6, Инструкция по эксплуатации

Страница: 8 / 67

Carla / My Documents
6
Rev. Date: 24 August 2018
“SK6000-BF6 Capper Manual-word document
(master)
”
APPLICATION SET-UP DATA SHEET
Customer: ________________________________________ Date: ______________________________
Machine Type / Serial No: ___________________________ Prepared By: ________________________
Cap Size / Type: __________________________________ Bottle / Size / Type: __________________
A Floating shoe block height S Conveyor speed (FPM)
B Front floating shoe height (Locked)
□
T Fixed hold down
C Chute height Y Finger number
D Gripper belt height (drop) V Floating Shoe number
E Gripper belts in - out W Cap Alignment Cylinder
F Spindle discs in - out * X Fiber Optic Trigger Level
G Clutched discs in - out * Y Fiber Optic ON Delay
H Chute in - out Z Fiber Optic OFF Delay
I Fingers in - out AA 2nd Floating Shoe height
J Floating shoe in - out BB
Flipper number
K Spindle height - 1st set
QUICK CHANGE PACKAGE ONLY
L Spring set collar height Gripper belts in - out
M Cap guides Spindle discs in - out *
N Bottle separation Clutched discs in - out *
O Spindle speed dial setting Chute in - out
P Gripper belt speed dial setting ** Capper Height Gauge
Q Cap Belt / Bowl speed dial setting Chute Bracket Scale
R Elevator / Hopper speed dial setting
* The purpose of these measurements is to give you a starting point when setting up the machine. As your discs wear, these
measurements will change.
In most cases, the first set of discs should touch the cap just enough to start it onto the bottle. Any clutched sets should hit the cap just
hard enough to "kick out" the clutches.
** This is the speed dial setting that was used during in plant testing. The gripper belt speed should match your conveyor speed.
*** Please note that all measurements given are in inches (unless otherwise specified).