SureKap SK6000-BF6, Инструкция по эксплуатации

Страница: 11 / 67

Carla / My Documents
9
Rev. Date: 24 August 2018
“SK6000-BF6 Capper Manual-word document (master) ”
CONVEYOR
A
B
C
B. FLOATING SHOE
Measure from the bottom of the front shoe to
the top of the conveyor belt. The purpose of
the floating shoe is to keep a light but constant
pressure on the cap until the first set of
spindles can start the cap and container
threads. The floating shoe is adjustable in
height by adjusting the set collar on the shaft
of the front shoe. It is also spring loaded and
spring tension can be increased or decreased
by raising or lowering the set collar
underneath the spring. You can also move the
floating shoe block (the block that holds the
floating shoe shafts) by loosening the socket
head cap screw at the bottom of the mount shaft.
STEP 1: Place a cap on top of the container
threads. Do not screw the cap down onto the
container. Place the container and cap on the
conveyor underneath the rear floating shoe,
turn the cap backwards on its threads until it
snaps down. Your cap will now be at its
lowest point. Adjust the set collar on the front
shoe shaft until there is about 1/16" to 1/8"
gap between the front and rear horseshoe
blocks on the floating shoe shaft. This will
give a light amount of pressure on the cap.