
396
-
3815Y1 SureFire PumpRight for Raven RCM
6
Revised 01/16/2018
Section Valves and LiquiShift Valves
Liquid
inlet
105
-
100075BRB90
105
-
100PLG (alternate
105
-
100PLG025 includes
1/4”
pipe
thread for gauge)
103
-
2501Y1
KZ TX2 Valve
(single complete valve)
117
-
211
-
0066
Liquid outlet to
each section
Additional Parts:
1”
Gasket
105
-
100G
-
H
1”
Clamp
105
-
FC100
How section valves work
Section valves can be assembled into
groups with a common inlet to control flow to each
section. Common assemblies use up to 5
-
6
valves, however, more can be used where
practical. Many alternate fittings can be used to
accommodate different hose sizes and
configurations.
The valves have a 3
-
pin weather pack
electrical connector. This has a power, ground,
and switched wire. The power measured to
ground should have 12 volts when the controller is
on. The switched wire will have 12 volts to turn
the valve on, and 0 volts to turn the valve off.
Wiring Connector:
Pin A—Red, 12 Volts +
Pin B—Black, Ground
-
Pin C—White, Signal
12V=on ; 0V=off
Mounting Hardware:
2 Valve Bolt Kit
384
-
1100
Mounting Bracket
400
-
2493Y1
B
Components
Liquid
Note: Ensure back
-
side port is
capped prior to use
How LiquiShift Works
LiquiShift is a section valve manifold
specifically built and controlled to provide the
operator a very wide flow range for variable rate
application. It is valuable for variable rate
prescription application or variable rate between
different fields. Each section has an A and B
valve that are opened based on the section
status, current rate and system pressure.
Therefore, a
4
–
section LiquiShift (shown above)
will have 8 total valves.
The valves themselves are identical to a
regular section valve (KX TX2) and have a 3
-
pin
weather pack electrical connector.
LiquiShift systems are available with
systems from 1
-
8 sections.
On the RCM, LiquiShift systems connect
to the RCM Adapter Harness with a 14
-
pin round
connector. Typically this connector would be for
Sections 1
-
6 (product 1) or Sections 7
-
12 (product
2). Your system may vary so check the specific
instructions with our RCM adapter harness.
Liquid
inlet
Pressure Sensor
A4
A3
A2
A1
B4
B3
B2
B1
SureFire
Ag
Systems