396
-
3815Y1 SureFire PumpRight for Raven RCM
45
Revised 01/16/2018
Setup instructions for Raven RCM and
SureFire: 2 Liquid Products
Valve Response Rate:
(Adjust as needed)
PumpRight (hydraulic)
80
Tower (electric)
100
Catalyst and Spartan
80
Control Deadband:
Start at 2
Flowmeter
Size (GPM)
Pulses/
Gal
0.08
-
1.6
22710
0.13
-
2.6
3000
0.3
-
5.0
3000
0.6
-
13
2000
1.3
-
26
2000
2.6
-
53
2000
10. Control Valve Setup
(start with the numbers indicated for your system)
11. Enter appropriate Flowmeter Cal.
12(a). Tank and Fill Flowmeter setup
12(b). Fill Flowmeter Cal setup
13.
Set
Rates
as desired.
You must enter at least one rate.
Check
Display Smoothing
Set the
Decimal Shift
box at
1.
Set
Decimal Shift at 2
for rates such
as 0.25 gal/ac.
14.
Set
Off
-
Rate Alarm
as desired.
Spartan
model
#
Puls/
fl oz
110
1760
120
880
130
440
140
220
F
Setup &
Operation
See at
Left
Low Limit (
Adjust in field as needed)
PumpRight (hydraulic)
25
Tower (electric)
8
Catalyst and Spartan
8
PWM Startup
(Adjust in field as needed)
PumpRight (hydraulic)
40
Tower (electric)
30
Catalyst and Spartan
10
See below
See
Above
If pump is slow responding to rate
or speed changes, increase
Valve
Response Rate
10 at a time. If
product oscillates around rate go-
ing across the field, reduce
Valve
Response Rate.
Electric Pumps
will also have to
use
Advanced Tuning
(described
later).
SureFire Electromagnetic Flowmeters.
Verify pls/gal on Serial Number label.
OPTIONAL: Use as desired
Then enter
Tank Fill Flowmeter
Calibration
SFA
3”
Fill Flowmeter
130
SFA
2”
Fill Flowmeter
300
(Units are 10 gal on SureFire Tank
Fill flowmeters .)
Check
Tank Fill Monitor
box if
using a fill flowmeter.
Read the
for safety information and additional setup/operating information.
Fine
-
tune PWM Low Limit at
Diagnostics > Tests > Calibrate
PWM Limits
Set up Product 2 in a similar fashion to the Product 1 setup.
OPTIONAL
SureFire
Ag
Systems
