396
-
3815Y1 SureFire PumpRight for Raven RCM
19
Revised 01/16/2018
Dual Check Valve Plumbing Diagram
4 Row Planter Shown, add rows as necessary
136
-
04
-
200400, Dual 4 PSI
check valve with
1/4”
QC caps
and
3/8”
FPT inlet
101
-
038075
-
90
-
W,
3/8”
MPT x
3/4”
HB
-
90 degree
101
-
075075075
-
HBT
-
H
3/4”
HB x
3/4”
HB x
3/4”
HB
Tee
Connect to flowmeter or
optional section valves
101
-
075075038
-
HBT
-
M
-
W 3/4"
HB x 3/4" HB x 3/8" MPT Tee
This is a general diagram showing the dual check valve assembly mounted on a planter toolbar. The check
valve and bracket are very flexible in their mounting. The check valve can mount behind, directly over, or in
front of the toolbar. The check valve can be put in the bracket facing up & down or sideways (shown). In ad-
dition the steel bracket could be rotated 90 degrees and clamp around the bar. The multiple slots in the
bracket are used to mount to any tube 7x7 inches or smaller.
113
-
19
-
025025025
Y Divider
-
1/4”
QC
Dual Metering Tube
-
8 feet long
Use
1/2”
or
3/4”
hose with
hose clamps to connect all
check valves.
Sectional Plumbing Diagram with Dual Check Valves
12 Row Planter Shown
End each section with
an elbow fitting
screwed into dual
check valve.
Section 1
Attach hose from section
valve to T fitting screwed
into dual check valve on
outside sections.
For a
2 section plumbing system
, omit the center section and plumb similar to the outside 2 sections.
Section 2
Section 3
Center section is fed
at the center by a
3/4”
hose barb tee. Termi-
nate center section on
each end with elbow
fittings.
Hose from flowmeter attaches to inlet
fitting of electric valve manifold.
B
Components
Liquid
SureFire
Ag
Systems
