Supero X8DTG-DF Скачать руководство пользователя страница 74

Страница: 74 / 95

4-18

X8DTG-DF

User’s Manual

2. The information provided above is for your reference only. For more

information on thermal management, please refer to Intel’s Web site at

www.Intel.com.

System Temperature:

The system temperature will be displayed (in degrees in

Celsius and Fahrenheit) as it is detected by the BIOS.

Fan1 ~ Fan 8 Reading

This feature displays the fan speed readings from Fan1 through Fan8. (Fan7 is

CPU1 Fan and Fan8 is CPU2 Fan.)

System Fan Monitor

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When

the CPU on-die temperature increases, the fan speed will also increase, and vice

versa. Select Workstation if your system is used as a Workstation. Select Server if

your system is used as a Server. Select “Disabled, (Full Speed @12V)” to disable

the fan speed control function and allow the onboard fans to constantly run at the

full speed (12V). The Options are:

1. Disabled (running @full-speed)

, 2. Server

Mode, and 3. Workstation Mode.

Voltage Monitoring

CPU1 Vcore, CPU2 Vcore, +5Vin, 12Vcc (V), V P1 DIMM, V P2 DIMM, 3.3V Vcc

(V) and Battery Voltage.



ACPI Confi guration

Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI)

power management settings for your system.

ACPI Version Features

The options are

ACPI v1.0

, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website

for further explanation: http://www.acpi.info/.

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.

The options are Enabled and

Disabled

Содержание X8DTG-DF
































































































Результаты поиска

Содержание X8DTG-DF

Отзывы:

Похожие инструкции для X8DTG-DF

Бренды по названию

Популярные бренды

Supero X8DTG-DF, Руководство пользователя

Результаты поиска

Содержание X8DTG-DF

Отзывы:

Похожие инструкции для X8DTG-DF

Бренды по названию

Популярные бренды